TudorandClaude Opus 5
ea5249a2ea
PR Checks / Frontend Typecheck + Tests (pull_request) Successful in 1m3s
PR Checks / Backend Smoke (pull_request) Successful in 7s
PR Checks / Build Backend (no push) (pull_request) Successful in 10s
PR Checks / Build Frontend (no push) (pull_request) Successful in 45s
PR Checks / Build Pipeline (no push) (pull_request) Successful in 11s
PR Checks / AI Code Review (Claude) (pull_request) Successful in 58s
The postcode check read "69 m away — inside the September 2026 cut-off of 0.17 miles". Both numbers are right and the sentence is still useless: the reader has to convert one of them to check a comparison we had already made for them. The cause was a readability rule of mine in formatCutoffDistance, which swapped to metres below 100m on the grounds that "0.04 miles" carries less than "69 m". Taken one figure at a time that holds. Taken in a sentence containing two figures it guarantees a mismatch whenever they fall either side of the threshold — and a 270m cut-off with a nearby home does exactly that. Miles now lead everywhere. It is the unit UK school admissions runs on: councils publish cut-offs in miles (90% of the collected source rows), and it is what a parent has already been quoted in their booklet and offer letter. The metric figure survives only as support beside the miles figure on the Admissions tile, where it converts the same value rather than presenting a second one to compare. Below 0.01 miles the decimal places run out rather than the unit being wrong, so a very short distance is described — "under 0.01 miles" — instead of rounding to a flat "0.00 miles", which would read as no distance at all. Both figures in the verdict now go through one formatter with no fallback that could reach for another unit. The old `?? "N m"` fallbacks on that line were a second route to the same defect and are gone. Covered by a sweep over sixty home/cut-off combinations spanning the old switch point, asserting no verdict contains a metric reading and that exactly two miles figures appear; plus the reported case pinned verbatim, and an e2e guard on the rendered verdict. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01WDvkyqqHABm4bmth2kjAxE
SchoolCompare Next.js Application
Modern Next.js application for comparing primary school KS2 performance across England.
Features
- Server-Side Rendering (SSR): Fast initial page loads with pre-rendered content
- Individual School Pages: Dedicated pages for each school with full SEO optimization
- Side-by-Side Comparison: Compare up to 5 schools simultaneously
- School Rankings: Top-performing schools by various metrics
- Interactive Maps: Leaflet integration for geographic visualization
- Performance Charts: Chart.js visualizations for historical data
- Responsive Design: Mobile-first approach with full responsive support
- SEO Optimized: Dynamic sitemaps, meta tags, and structured data
Tech Stack
- Framework: Next.js 16 (App Router)
- Language: TypeScript 5
- Styling: CSS Modules + CSS Variables
- State Management: React Context API + URL state
- Data Fetching: SWR (client-side) + Next.js fetch (server-side)
- Charts: Chart.js + react-chartjs-2
- Maps: Leaflet + react-leaflet
- Testing: Jest + React Testing Library
- Validation: Zod
Getting Started
Prerequisites
- Node.js 24+ (using nvm recommended)
- FastAPI backend running on port 8000
Installation
# Install dependencies
npm install
# Copy environment variables
cp .env.example .env.local
# Update .env.local with your configuration
Development
# Start development server
npm run dev
# Open http://localhost:3000
Building
# Build for production
npm run build
# Start production server
npm start
Testing
# Run tests
npm test
# Run tests in watch mode
npm run test:watch
# Run tests with coverage
npm run test:coverage
Linting
# Run ESLint
npm run lint
Project Structure
nextjs-app/
├── app/ # App Router pages
│ ├── layout.tsx # Root layout
│ ├── page.tsx # Home page
│ ├── compare/ # Compare page
│ ├── rankings/ # Rankings page
│ ├── school/[urn]/ # Individual school pages
│ ├── sitemap.ts # Dynamic sitemap
│ └── robots.ts # Robots.txt
├── components/ # React components
│ ├── SchoolCard.tsx # School card component
│ ├── FilterBar.tsx # Search/filter controls
│ ├── ComparisonView.tsx # Comparison interface
│ ├── RankingsView.tsx # Rankings table
│ └── ...
├── lib/ # Utility libraries
│ ├── api.ts # API client
│ ├── types.ts # TypeScript types
│ └── utils.ts # Helper functions
├── hooks/ # Custom React hooks
├── context/ # React Context providers
├── styles/ # Global styles
├── public/ # Static assets
└── __tests__/ # Test files
Environment Variables
| Variable | Description | Default |
|---|---|---|
NEXT_PUBLIC_API_URL |
Public API endpoint (client-side) | http://localhost:8000/api |
FASTAPI_URL |
Server-side API endpoint | http://localhost:8000/api |
NODE_ENV |
Environment mode | development |
Performance Optimizations
- Server-Side Rendering: Initial HTML rendered on server
- Static Generation: Where possible, pages are pre-generated
- Image Optimization: Next.js Image component with AVIF/WebP support
- Code Splitting: Automatic route-based code splitting
- Dynamic Imports: Heavy components loaded on demand
- API Caching: Configurable revalidation for data fetching
- Bundle Optimization: Tree shaking and minification
- Compression: Gzip compression enabled
SEO Features
- Dynamic Meta Tags: Generated per page with Next.js Metadata API
- Open Graph: Social media optimization
- JSON-LD: Structured data for search engines
- Sitemap: Auto-generated from database
- Robots.txt: Search engine crawling rules
- Canonical URLs: Duplicate content prevention
Browser Support
- Chrome (latest)
- Firefox (latest)
- Safari (latest)
- Edge (latest)
License
Proprietary - SchoolCompare
Support
For issues and questions, please contact the development team.